User manual BESAFE IZI SLEEP V8.0

[. . . ] Important: Correct seat belts iZi Sleep is only approved with 3-point-belt installation. OK Shoulder belt Lap belt NO This is a 3-point-belt Rear facing installation: This is a 2-point-belt Positioning in car: AIRBAG Only rear facing installation allowed. Allowed positions in car, only with 3-point-belt. Preparing to install Crucial parts 1 Sun canopy 2 `safe-to-drive' indication 3 Handle release buttons 4 Internal harness 5 Harness buckle 6 Central adjuster 7 Crotch belt 8 Carrying handle (also tensioner) 9 Upper cover 10 Shoulder belt guide 11 Lower cover 12 Belt slot 13 Shoulder belt guide 14 Base 15 Stroller adapter house 16 Stroller adapter handle 17 Shoulder belt slot (3x) 18 Shoulder belt adjuster 19 Storage compartment user manual Fitting your child in the iZi Sleep a Position of the shoulder belt: Check that the shoulder belt slots (17) are level with your child's shoulders. Too high Too low Correct b Adjusting the schoulder belts: Open the storage compartment (19) on the back of the iZi Sleep. Detach the shoulder belt adjuster (18), and place it in the correct position by supporting the belt from the inside. [. . . ] Although they may look undamaged, if you were to have another accident, the iZi Sleep and your car seat belts may not be able to protect your child as well as they should. 10 Guarantee All BeSafe products are carefully designed, manufactured and tested. All BeSafe child safety seats are tested periodically out of our continuous production in our test laboratory. Should this product prove faulty within 24 months of purchase due to materials or manufacturing fault, except covers and child safety belt, please return it to the original place of purchase. The guarantee is only valid when you use your seat appropriately and with care. Please contact your dealer, he will decide if the seat will be returned to the manufacturer for repair. - When defects are caused by abuse, misuse or negligence. 11 Removing and refitting the cover ! The cover is a safety feature. DO use the child safety belt provided with the iZi Sleep at all times. Removing the cover Pay attention when removing the cover, refitting is done in reverse order. 2 Removing the upper cover (9): - Detach the cover from the small hooks on both sides of the back part (a). - Release the rubber bands that attach the cover to the inside of the back (b). a 9 c b d 1 ! 3 Removing the lower cover (11): - Detach the elastic knots of the lower cover (e). 11 - Detach the elastics which attach the cover to the inside of the seat-part of the iZi Sleep. Refitting the cover Refit the cover, using the instructions above in reversed order. Washing instructions ! The cover of the iZi Sleep should be washed in accordance with instructions (on the inside of the cover). The cover should be washed on a 30 degrees woolwash program with delicate washing powder . Alcantara: Cleaning harness system and iZi Sleep Do not use any aggresive cleaning products; these may harm the construction material of the iZi Sleep. Clean by hand with water and mild soap. 1 Using the iZi Sleep with a stroller The iZi Sleep can be installed on a range of strollers. Installation on a stroller 1 Align the stroller adapter house (15) above the adapter on the stroller and move straight down, `click'. 15 2 Move the carrying handle (8) into sleeping position. 8 14 Removing from a stroller 1 Move the carrying handle (8) into carrying position. [. . . ] - The cover of the iZi Sleep should be washed in accordance with the instructions. - Do not use any aggresive cleaning products; these may harm the construction material of the iZi Sleep. 1 Point of sale information Notice: 1. 44. 04 series of amendments, for general use in vehicles and it will fit most, but not all, car seats. [. . . ]