User manual BEKO WUX81232WI

[. . . ] This section includes security instructions which may help prevent the injuries and material damage risks. All kinds of warranties shall be invalid if these instructions are not observed. Electrical parts will get overheated since air cannot circulate from under the device. Always have the installation and repairing procedures carried out by the Authorised Service Agent. [. . . ] Antimacchia (StainExpert) Your washing machine has a special stain programme ensuring that different types of stains are removed in the most efficient way. You should check the tags of clothing before washing (recommended for shirts, trousers, shorts, t-shirts, baby clothes, pyjamas, aprons, table cloths, bedding, duvet covers, sheets, bath/brach towels, regular towels, socks, and cotton underwear suitable for long washing cycles at a high temperature). With the auto stain programme, you can remove 24 types of stains grouped into two categories according to quick function selection. When the quick function is not selected: In the stain groups stated above, find the type of stain you want to remove and select the quick auxiliary function selection key to select the relevant group. Carefully read the tag of the clothing and make sure that the temperature and spin speed selected are suitable. Thanks to special spin profiles, it is ensured that water reaches the air gaps between feathers. 7 Special programmes For specific applications, select any of the following programmes. Before selecting this programme, select the desired spin speed and press Start/Pause button. Then, it will spin the laundry at the selected spin speed, and drain the water coming off of the laundry. If you only want to drain the water without spinning the laundry, select the "Spin+Pump programme, and use the Spin Speed Adjustment button to select the No Spin function. 8 Temperature selection Whenever a new programme is selected, the recommended temperature for the selected programme appears on the temperature indicator. When the cold level is selected, temperature level lights will not be on. If the programme has not reached the heating step, you can change the temperature without switching the machine to Pause mode. 9 Spin speed selection Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the spin speed indicator. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. When the "No Spin" function is selected, rinse level indicator lights will not be on. rinse hold If you are not going to unload your clothes immediately after the programme ends, you can use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. Press Start/ Pause button after this process if you want to drain the water without spinning your laundry. Programme will resume where it left off, drain the water and then it will be complete. If you want to spin the laundry held in water, adjust the Spin Speed and press Start/Pause button. If the programme has not reached the spin step, you can change the spin speed without switching the machine to Pause mode. 10 Auxiliary function selection Select the desired auxiliary functions before starting the programme. [. . . ] >>>Select the proper programme and temperature for the laundry to be washed. Odours and bacteria layers are formed on the drum as a Result of continuous washing at lower temperatures and/ or in short programmes. >>>Leave the detergent drawer as well as the loading door of the machine ajar after each washing. Thus, a humid environment favorable for bacteria cannot occur in the machine. [. . . ]