User manual BEGLEC STAGE COLOR 48 PRELIMINARY MANUAL

[. . . ] Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and is able to support a 10 times weight of the unit. Maximum ambient temperature is TA: 40. Don't operate it where the temperature is In the event of serious operating problem, stop using the unit immediately. Repairs carried out by unskilled people can lead to damage or use the same type spare parts. malfunction. [. . . ] If you choose Maun, press the ENTER button to confirm, you can press DOWN and UP button to select Red or Green or Blue or White/Amber, press ENTER button to confirm and press DOWN and UP button to adjust the value, then press ENTER button to store. Back to the main functions without any change press the MENU button or wait for 8 seconds. Slave Mode Black Out Press the MENU button up to when the Black Out is showing on the display. Use DOWN and UP button to select the yes (yes blackout) or no (no blackout) mode. Back to the main functions without any change press the MENU button or wait for 8 seconds. Back Light Press the MENU button up to when the Back Light is showing on the display. Use DOWN and UP button to select the on (back light on) or off (back light off 1 minute after auto show) mode. Back to the main functions without any change press the MENU button or wait for 8 seconds. Auto Test Press the MENU button up to when the Auto Test is showing on the display. and the unit will run self-test by built-in Press the MENU button up to when the Slave Mode is showing on the display. Use DOWN and UP button to select the slave 1 or without any change press the MENU button or wait for 8 seconds. Back to the main functions Press the MENU button up to when the Sound State is showing on the display. Use DOWN and UP button to select the on (sound control on) or off (sound control off) mode. Back to the main functions without any change press the MENU button or wait for 8 seconds. Sound Sense Press the MENU button up to when the Sound Sense is showing on the display. Use DOWN and UP button to adjust the sound sensitively (1-100) of the unit. Back to the main functions without any change press the MENU button or wait for 8 seconds. Press the MENU button up to when the Manual Test is showing on the display. Press ENTER button and Red 1 will blink, use DOWN and UP button to choose Green 1 or Blue 1 or White/Amber 1 or Red2 or . . . or White/Amber 4 or Dimmer or Strobe, press ENTER button to enter, then press DOWN and UP button to adjust the value and press ENTER button to choose next optional. Back to the main functions without any change please press the MENU button. White Balance Press the MENU button up to when the White Balance is showing on the display. [. . . ] Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit's optics. every 30/60 days. Clean the external optics at least every 20 days. If the DMX LED is on and no response to the channel, check the address settings and DMX polarity. If you have intermittent DMX signal problems, check the pins on connectors or on PCB of the unit or the previous one. [. . . ]