User manual BEGLEC MIRROR BALL MOTOR VERSION 1.0
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BEGLEC MIRROR BALL MOTOR. We hope that this BEGLEC MIRROR BALL MOTOR user guide will be useful to you.
You may also download the following manuals related to this product:
BEGLEC MIRROR BALL MOTOR VERSION 1.0 (560 ko)
Manual abstract: user guide BEGLEC MIRROR BALL MOTORVERSION 1.0
Detailed instructions for use are in the User's Guide.
[. . . ] This product meets the requirements of the current European and national guidelines. This device has been designed to produce decorative effect lighting and is used in light show systems. Mechanic fall safety when the axis inside the motor breaks · Approved load with 10-fold testing weight · additional eyelet for mounting an additional safety chain · Can be used with mirror balls weighing up to 6kg, including chain. Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. [. . . ] It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. ⷠKeep this booklet in a safe place for future consultation. Important: The installation must be carried out by qualified service personal only. Improper installation can result in serious injuries and/or damage to property. Working load limits should be respected, certified installation materials should be used, the installed device should be inspected regularly for safety. ⷠMake sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. ⷠLocate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. ⷠThe device should be installed out of reach of people and outside areas where persons may walk by or be seated. ⷠBefore rigging make sure that the installation area can hold a minimum point load of 10times the device's weight. ⷠAlways use a certified safety cable that can hold 12times the weight of the device when installing the unit. This secondary safety attachment should be installed in a way that no part of the installation can drop more than 20cm if the main attachment fails. ⷠThe device should be well fixed; a free-swinging mounting is dangerous and may not be considered! ⷠDon't cover any ventilation openings as this may result in overheating. ⷠThe operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. The installations should be inspected every year by a skilled person to be sure that safety is still optimal. To protect the environment, please try to recycle the packing material as much as possible. ⷠTo prevent fire or shock hazard, do not expose this appliance to rain or moisture. ⷠTo avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even cause damages. [. . . ] ⷠIn the event of serious operating problems, stop using the fixture and contact your dealer immediately. Make sure the area below the installation place is free from unwanted persons during servicing. During inspection the following points should be checked: · All screws used for installing the device and any of its parts should be tightly fastened and may not be corroded. ⷠHousings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any deformation. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BEGLEC MIRROR BALL MOTOR
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BEGLEC MIRROR BALL MOTOR will begin.