User manual BEGLEC LB-30 V 1.0
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BEGLEC LB-30. We hope that this BEGLEC LB-30 user guide will be useful to you.
Manual abstract: user guide BEGLEC LB-30V 1.0
Detailed instructions for use are in the User's Guide.
[. . . ] Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Lower the upper section until there is at least 40cm distance between the top of the upper section and the top of the truss system. [. . . ] Before you start using this light bridge, please check if there's no transportation damage. Should there be any, do not use the light bridge and consult your dealer first. Important: This light bridge left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. The dealer will not accept responsibility for any resulting problems caused by disregarding this user manual. Make sure the area below the installation place is free from unwanted persons during servicing. The installations should be inspected every year by a skilled person to be sure that safety is still optimal. During inspection the following points should be checked: All screws used for installing should be tightly fastened and may not be corroded. All the parts from the light bridge should be totally free from any deformation. Distributed load: Weight complete bridge: Height complete bridte: Width between stands: Total width incl T-bars: Truss elements (2pcs): T-bar size: Light stands top section: Light stands middle section: Light stands base section: 100kg 20kg 1, 62m to 3, 25m 3m 4, 2m L=1, 5m/pc, total=3m (tube=38mm) 1, 2m (D=38mm) H=84cm, 2 preset holes (D=38mm) H=96cm, 5 preset holes (D=41mm) H=130cm (D=45mm) Important: The installation must be carried out by qualified service personal only. [. . . ] For your convenience, set the vertical sections on the lighting stands to 46cm above the upper base (clutch) of the lower section. Assemble the 2 truss ends with the center adapter to obtain a solid 3m long truss. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BEGLEC LB-30
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BEGLEC LB-30 will begin.