User manual BEGLEC DX-626
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BEGLEC DX-626. We hope that this BEGLEC DX-626 user guide will be useful to you.
Manual abstract: user guide BEGLEC DX-626
Detailed instructions for use are in the User's Guide.
[. . . ] DMX DIMMER PACK
Lite-Puter Enterprise Co. , Ltd.
WEBSITE: www. liteputer. com. tw E-MAIL: sales@liteputer. com. tw
Lite-Puter DX-610/626 [EUM-E]
ISO 9001 CERTIFIED
www. liteputer. com. tw
INDEX
Safety Introductions . . . . . . . . . . . . . . . . . 2
Chapter 1. Introduction of DX-610/626
1-1 1-2 1-3 1-4 1-5 1-6 Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Otherwise the machine will become over-heat and result in the mis-function. output of each channel if 10A: For testing (DO Not over 30 minutes) DX-626: the max. output of each channel if 20A: For testing (DO Not over 30 minutes) 3. DX-610: the output of each channel is8A: For several hours use (Theaters, Stages) DX-626: the output of each channel is16A: For several hours use (Theaters, Stages) 4. DX-610: the output of each channel is 8A: Can work for the whole year without switching off (Hotels, Restaurants, Buildings) DX-626: the output of each channel is 12A: Can work for the whole year without switching off (Hotels, Restaurants, Buildings)
2.
Working Environment
1. If the machine is installed in a rack, then the temperature inside the rack must be under 45°C 3. Humidity40% --- 80%
Suggested Dimming Lights
Incandescent lamps, halogen lamps, low volt halogen lamps with ballast.
2
Lite-Puter DX-610/626 [EUM-E]
ISO 9001 CERTIFIED
www. liteputer. com. tw
Chapter 1.
1-1 Feature
Introductions of DX-610/626
6 dimming channels. Temperature control device: When the temperature is over 35the fan will start automatically. Auto tracking of frequency: Enables stable dimming output in different frequencies. (Warm-up setting 0---6. 0%)
1-2 Brief device introductions
DX-610: 10A no fuse breaker. Fan for temperature controlling to sink heat and clean the dust inside. (37CFM X 1) The front panel can be dismantled easily for quick repair.
1-3 Specification
Power Output AC100-240V, 45-63Hz, 3Ø4W, 1Ø2W DX-610: Maximal output is 10A each channel DX-626: Maximal output is 20A each channel (Please refer to the user manual) DMX signal output/ input DMX signal connector Analog signal power input Analog input channel DMX512/ 1990 XLR 5Pin, RJ11-6p4c phone jack DC 0-10V 9 channels PIN 1~6( CH1~6, PIN 7(NC, PIN 8(V+12V OUT, PIN 9(GND Analog signal connector D-Type Plug 9Pin(F)
3
Lite-Puter DX-610/626 [EUM-E]
ISO 9001 CERTIFIED
www. liteputer. com. tw
Dimension Location Weight 1-4 Front panel
482(W) x 88(H) x 300(D)mm 19" 2U standard rack 8Kg
4
CH1 CH2 CH3 CH4 CH5 CH6
2
DMX OUT
6CH. [. . . ] When there is another signal inputting from a console, it will take the higher value as the output.
2-7
Display the dimming value of DMX channel,
internal temperature.
PressLto display the dimming value of DMX channel. PressTto display the internal temperature.
2-8
DMX status & DMX address
a. pressDMXto DMX status b. 10 minutes unused of unit, the DMX will activate to DMX status
8
Lite-Puter DX-610/626 [EUM-E] [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BEGLEC DX-626
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BEGLEC DX-626 will begin.