User manual AVIOSYS IP KAMERA 9070-IRW FIRMWARE V1.2.1.4PLUS

[. . . ] IP Kamera 9070-IRW User Manual Release Date: 2010/7/22 Manual Version: V1. 00 Firmware Version : V1. 2. 1. 4plus - 1Ref#90020326K0709 Warning: Any changes made to this equipment without permission may cause damages to the device! IMPORTANT NOTICE 1. Please use the power adapter provided by the dealer, the manufacturer is not responsibility for the possible damage from using power adapters. Please contact the dealer If IP Kamera 9070-IRW is not working properly. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of us. [. . . ] Scaled 720: Is a resolution only available in MPEG-4-1, which sets the picture at 720P. This function is very useful when trying to display on larger monitors. - 27Ref#90020326K0709 Motion Detection Motion Detection: The motion detection icon will display when motion has been detected. This setting must be activated in the application section When no motion is detected the motion detection icons will look like the following. No Motion Detected But, in the case that motion is detected and recording has started, the icon will look will light up blue. Motion Detected Mouse EPTZ Mouse EPTZ On the live video screen move the mouse cursor to the video and click left or right click to use the Mouse ETPZ functionality. The instructions will be displayed on the screen when the mouse if moved over the icon. To Zoom In: To Zoom into the picture move the mouse cursor over the picture and click and hold the left mouse. To Zoom Out: To Zoom out of the picture move the mouse cursor over the picture and click and hold the right mouse. Quick Zoom In: Quick zoom in is used to quickly zoom into the maximum zoom of the picture. Quick Zoom Out: Quick zoom out is used to quickly zoom into the maximum zoom of the picture. To use this function on the picture double click the right mouse. Active Record Active Record: Active record will show up when the device is actively recording. Active recording functions like motion detection, scheduler, or an alarm will set off this automatic recording. When active recording is not activated it will look like the picture below When the active recording function is activated it will light up in red. - 28Ref#90020326K0709 Record Record: The record button on the 9070-IRW when pressed will record the live video feed and save the video into the computer viewing. To record follow the following steps: 1. ) Select the recording path that you would like to store the file under in the applications tab in snapshot path. 2. ) Click on the record button 3. ) Once the folder has been selected the device will start to record. To stop recording click on the red icon and it will return to the original state. Note: Remember you need VLC codec to play the video files that are recorded Snapshot Snapshot: The snapshot function, creates a easy way take pictures of the current view in the IP Kamera 9070-IRW. To setup the snapshot destination folder: 1. ) Click on the Application link on the bottom menu 2. ) Then select Snapshot path 3. ) In here browse for the location where snapshot pictures will be stored. By default the snapshot path will be in C:\9070\ - 29Ref#90020326K0709 To use the snapshot function: 1. ) Click on the snapshot button, and you will see the screen flicker black. 2. ) In explorer go to the selected path and the files will be created there. Image The image section allows you to change the Image settings for the device and tune the image of the IP Kamera 9070-IRW Image Settings The Image settings section allows you to change the video settings and the Name of the Kamera. Camera Name: Select a camera name for the device and then hit submit Video Codec: The Video Codec sections allows you to select different the types of codec you would like to set your IP Kamera, By selecting different resolutions your - 30Ref#90020326K0709 Resolution: In the resolution section you can select from the following options. Resolution (MPEG4+MPEG4+JPEG): M4:720P, M4:CIF, JPG:352 (MPEG4+M-JPEG): M4:VGA, JPEG:VGA M4:720P, JPG:720 (MPEG4-1+MPEG4-2) M4:720, M4:CIF Not supported in Firefox: (Single MPEG4): M4:720 (Single MJPEG): M4:720 Color System: Select the broadcasting color system that pertains to your country. NTSC/60Hz PAL/50Hz Each country has their TV broadcasting standard, please check with your local service provider to find out if you us a NSTC system or PAL system. Mirror: The mirror function allows you to flip the image of the device around. Depending the direction and the way the camera is mount you can use this setting to change the angle of the picture. Normal View: Normal View Horizontal View Vertical Both Rate Control: Select the Bit Rate Control that fits your needs. CVBR: Constrained Variable Bit Rate CBR: Constant Bit Rate Internet Speed: The Internet Speed settings allows you to choose some preset settings to best fit your current internet speeds. From here you can select from the following options: Cable / ADSL: Most high speed internet users today use Cable / ADSL as the main internet provider line. - 31Ref#90020326K0709 Fiber Optics: High speed fiber optics provides the best solution for outside the network because it is very fast. Intranet (LAN): When using the IP Kamera from within the network this is the best option. Custom: This setting allows you to manually input a setting for the Bit Rate, FPS, and picture quality. M-JPEG Settings: The available Quality settings and FPS for the M-JPEG settings are shown below M-JPEG Quality Settings High Medium Low M-JPEG Frame Rate Settings 30 FPS 15 FPS 7. 5 FPS 3 FPS 1 FPS MPEG4-2 Bit Rate: Select a value from 64~8000. [. . . ] Using Surf 16 CH and multi device DVR monitoring software, you can easily view your 9070-IRW. Follow these simple steps: MAC Address There are two ways to find the MAC address in IP Edit . Find MAC Address in LAN Using IP Edit 1. ) In IP Edit , highlight the device that you are using. On the right side of IP Edit you will find the MAC Address that you will need to use CNT. [. . . ]