User manual AVIOSYS IP KAMERA 9070-IR V1.2

[. . . ] IP Kamera 9070-IR User Manual Release Date: 10/20/2009 Manual Version: 1. 2 - 1Ref#90020326K0709 Warning: Any changes made to this equipment without permission may cause damages to the device! IMPORTANT NOTICE 1. Please use the power adapter provided by the dealer, the manufacturer is not responsibility for the possible damage from using power adapters. Please contact the dealer If IP Kamera 9070-IR is not working properly. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of us. [. . . ] If this screen does not appear make sure that active x has been allowed in internet explorer. 2. ) Right click on yellow bar and install the activeX controls. - 16Ref#90020326K0709 3. ) Then click the install button and install the active X controls. 4. ) Once activeX controls have been installed the video feed will show on the screen - 17Ref#90020326K0709 Note: If no active x controls are showing up, please go to internet explorer and enable activeX controls. - 18Ref#90020326K0709 The Control Console The IP Kamera 9070-IR Control Console starts in the navigate to the other options and settings of the 9070-IR Section of the webpage. In this section Live Video: The Live Video section allows the user to view the camera, change resolution views, Image: The Image section allows the user to adjust the image settings, including recording / viewing codec, frame rate, image tuning, brightness, contrast, saturation, and etc. Network: The network section allows the user to change the devices network settings, ftp settings, smtp (email) settings, sntp settings, and IP service settings. System: The system section allows the user to change the devices date and time, set time stamp for video, users, audio settings, update, and event log. Application: The application section allows the user to change the video recording format, ftp storage settings, SD Card settings, EPTZ-Set: The EPTZ allows the user to zoom into the cameras image using digital zoom with pan & tilt. Media Player: The Media player can directly access the files in the built in memory. Each video file & picture can be accessed here and streamed through the internet. - 19Ref#90020326K0709 Live Video The Live video section of the IP Kamera 9070-IR is where the user can view the video of the device. From here resolution, record onto current pc, take a snapshot, zoom, and detect motion detection settings can be changed. Type and Zoom Type: The type function sets the streaming format for the IP Kamera 9070-IR. Select from the following type of resolutions depending on the format type set in the image settings. M-JPEG (640x 352) MPEG4-1 (1280x720) MPEG4-2 (352x192) Zoom: The zoom function selects the screen size of the stream. Depending on the type mode selected there will be different zooms that will be available. 1X zoom: The 1X zoom is the normal view for each type. Scaled 720: Is a resolution only available in MPEG-4-1, which sets the picture at 720P. This function is very useful when trying to display on larger monitors. Mouse EPTZ Mouse EPTZ On the live video screen move the mouse cursor to the video and click left or right click to use the Mouse ETPZ functionality. The instructions will be displayed on the screen when the mouse if moved over the icon. - 20Ref#90020326K0709 To Zoom In: To Zoom into the picture move the mouse cursor over the picture and click and hold the left mouse. To Zoom Out: To Zoom out of the picture move the mouse cursor over the picture and click and hold the right mouse. Quick Zoom In: Quick zoom in is used to quickly zoom into the maximum zoom of the picture. Quick Zoom Out: Quick zoom out is used to quickly zoom into the maximum zoom of the picture. To use this function on the picture double click the right mouse. Motion Detection Motion Detection: The motion detection icon will display when motion has been detected. This setting must be activated in the application section No Motion Detected Motion Detected Active Record Active Record: Active record will show up when the device is actively recording. Active recording functions like motion detection, scheduler, or an alarm will set off this automatic recording. - 21Ref#90020326K0709 Automatic Recording Inactivated Automatic Recording Activated Record Record: The record button on the 9070-IR when pressed will record the live video feed and save the video into the computer viewing. To record follow the following steps: 1. ) Click on the record button 2. ) Then select the designated folder to store the file. Then hit okay. 3. ) Once the folder has been selected the device will start to record. To stop recording click on the red icon and it will return to the original state. Note: Remember VLC codec is required to play the video files that are recorded Snapshot Snapshot: The snapshot function, creates a easy way take pictures of the current view in the IP Kamera 9070. To setup the snapshot destination folder: 1. ) Click on the Application link on the bottom menu 2. ) Then select Snapshot path 3. ) In here browse for the location where snapshot pictures will be stored. By default the snapshot path will be in C:/ - 22Ref#90020326K0709 To use the snapshot function: 1. ) Click on the snapshot button 2. ) In explorer go to the selected path and the files will be created there. Image The image section changes the Image settings for the device and tunes the image of the IP Kamera 9070-IR Image Settings The Image settings section changes the video settings and the Name of the Kamera. Camera Name: Select a camera name for the device and then hit submit Video Codec: \ - 23Ref#90020326K0709 Resolution: Resolution (MPEG4+MPEG4+JPEG): M4:720P, M4:CIF, JPG:352 (MPEG4+JPEG): M4:VGA, JPEG:VGA (MPEG4+JPEG): M4:720, JPEG:352 (MEG4+MPEG4): M4:720, M4:CIF (Single MPEG4): M4:720 Color System: Select the broadcasting color system that pertains the country. NTSC/60Hz PAL/50Hz Rate Control: Select the most suitable Bit Rate Control. CVBR: Constrained Variable Bit Rate CBR: Constant Bit Rate M-JPEG Settings: The available Quality settings and FPS for the M-JPEG settings are shown below M-JPEG Quality Settings High Medium Low M-JPEG Frame Rate Settings 30 FPS 15 FPS 7. 5 FPS 3 FPS 1 FPS MPEG4-2 Bit Rate: Select a value from 64~8000. FPS: Select a FPS from 15fps or 7. 5fps MPEG4-1 Bit Rate: Select a value from 64~8000. [. . . ] For 1280 x 720P (Mpeg4-1): Port forward to 554 If Port forwarding (Mpeg4-2): Port forward to 8554 1. ) Open VLC media Player 2. ) Click on Tools > Preference 3. ) On the bottom of the screen click the Reset preference button. 4. ) On the bottom left hand side of VLC select the all under the show settings area. 5. ) Then in the left panel select Input / Codecs > Demuxers > RTP/RTSPl and type in the RTSP user name and RTSP password. - 46Ref#90020326K0709 6. ) Check the Cache value. Note: If the video is not smooth, set the caching value from 150~1200. 7. ) Save the new settings 8. ) Then go back to the VLC media player and go to Media > Advance Open File 9. ) Next select the network tab and under the protocol select RTSP. 10. ) Type in the RTSP address of your device For Mpeg4 Stream1 : rtsp://<IP Address>/mpeg4 For Mpeg4 Stream2 : rtsp://<IP Address>:8554/mpeg4 Example: rtsp://122. 116. 137. 123/mpeg4 - 47Ref#90020326K0709 Hit the play button and wait a few seconds for the program to start streaming. 9. ) Using CNT with Surf16 CH CNT makes connecting to the IP Kamera 9070-IR a very simple task. Surf 16 CH a multi-device DVR monitoring software easily allows the user view the 9070-IR. [. . . ]