User manual AUDIOVOX AOM-58

[. . . ] This warranty does not extend to the elimination of externally generated static or noise, to the correction of antenna problems, to costs incurred for removal or reinstallation of the product, or to damage to any tapes, speakers, accessories, or electrical systems. This warranty does not apply to any product or part thereof which, in the opinion of the company, has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident. [. . . ] Input switch " A " used mainly for rear mounted camera or as specified by the installer. " B " used mainly for side or mirror mounted camera or as specified by the installer. Day / Night switch Pre-set brightness and contrast levels optimized for day and night operation. Should be adjusted if the " DAY / NIGHT " switch does not achieve the most desirable picture. Should be adjusted if the " DAY / NIGHT " switch does not achieve the most desirable picture. Volume Variable control of internal speaker and external speaker volume. POWER INPUT DAY/NIGHT + + + Rear of Monitor 1. Power connection : Pin 1 not used Pin 2 Ground - black wire Pin 3 Reverse circuit - blue wire Pin 4 not used Pin 5 battery backup - yellow wire Pin 6 + 12VDC ignition - red wire 2. External speaker connection center pin is positive audio output, used to disable the internal speaker and remotely mount a speaker for driver convenience. * MONITOR BACK VIEW MODEL : AOM-58 POWER SOURCE : DC11~30V OUTPUT POWER : MAX 20W EXT SPKR CA2 CA1 POWER MONITOR OPERATING CONTROLS AND CONNECTIONS 3 4 5-0. 236 DIA HOLES INSTALLATION INSTRUCTIONS AOM-58 MONITOR 1. Attach monitor inside vehicle in a location convenient to the driver (e. g. Use a compression plate to attach the monitor bracket to the dash or overhead (See Fig. Adjust mounting angle of the monitor to allow driver to easily view the screen from all seat position (See Fig. Press all (4) sides of the visor to snap it into place. STEEL PLATE FOR REINFORCEMENT (RECOMMENDED FOR SECURE MOUNTING) SPRING WASHER PLAIN WASHER MAINTENANCE : Remove dust and dirt with a damp soft cloth. Heavier dirt should be removed with a damp soft cloth and mild detergent. Do not use strong cleaning agents containing gasoline, thinner, benzene or alcohol. [. . . ] Attach the markers to the monitor screen over the images of the distance indicators. These markers represent a distance of (3) feet, (6) feet and (9) feet from the back of the vehicle. [. . . ]