Detailed instructions for use are in the User's Guide.
[. . . ] When you press a touchpad, a red indicator light at the upper left of the touchpad glows to show that you selected that program or option. After you've selected the desired wash program and options, press Start.
Touchpad Controls Press these touchpads to select programs and options.
Pans Super Normal
Indicator Lights These lights glow red to indicate which program and options you have selected.
Light Quick Rinse Plate warm Delay
Economy
Heat dry
Fan cool
Temp
Cancel
Start After you've selected the desired wash program and options, press this touchpad to start the dishwasher.
Start
Rinse aid
Stop
LED Window The LED window displays temperature settings, program run time, delay time, and fault codes.
Rinse Aid Indicator Glows red when the rinse aid dispenser needs to be refilled.
WASH PROGRAMS AND OPTIONS
Your ASKO dishwasher has several wash programs and options specifically designed to reduce your energy costs and make your life easier. Press the touchpad(s) to select the desired program and option(s).
Programs
Pans For the heaviest soiled loads, such as pots, pans, casseroles, etc. [. . . ] Temp Lets you select the water temperature for the wash programs (except Rinse). Refer to "Temperature Options" on the next page for a conversion table.
Start
Stop
Start After you've selected your wash program and options, press this touchpad to start the dishwasher. If you've started the dishwasher then decide to change a program or an option, press and hold Start for five seconds to cancel the program and stop the machine. Make your new selections and press Start again.
PROGRAM MEMORY PR OGRAM MEMORY
When you select the Pans, Super, or Normal wash program, the dishwasher retains the settings until you change them. If you want to use a different wash program or option, press the touchpad(s) for the desired selections, then press Start.
STAR PROCEDURES ART QUICK START PROCEDURES
1. Simply scrape off large food particles before you load the dishware. ) 2. After you've pushed the baskets back inside the unit, manually rotate the upper and lower spray arms to be sure they turn freely. The dishwasher will start.
Refer to this page in the Use & Care Guide.
3, 4 3 5, 6 4, 5
AMOUNT OF DISHWASHING DETERGENT TO USE
We recommend that you use only unscented, granular automatic dishwashing detergent. Generally, one tablespoon of detergent is needed for a normal wash load. Also, the amount of detergent needed can vary due to differences in water hardness. (See page 5. ) In any case, you should never use more than three tablespoons of detergent.
WINDOW DISPLAY LED WINDO W DISPLAYS
empera ture Temper a tur e Settings
The wash programs (except Rinse) have water temperature options, as shown in the table below. Once you select a temperature, it will remain selected until you change it (except the Light and Quick wash programs, which revert to 130° F). We recommend that you use the lower temperature settings whenever possible to conserve energy. Wash Program Pans, Super & Normal Light & Quick 55° C (130° F) 45° C (110° F) Temperature Options 65° C (150° F) 55° C (130° F) 70° C (160° F) 65° C (150° F) 75° C (170° F)
Program Time
When a program starts, the LED displays the time it took that program to run last time. If the time exceeds an hour, the display alternates between the hour and minutes remaining. The program times may not always be the same because of variations in the household hot water temperature. [. . . ] When you open the door, the indicator light for the wash program you last used will come on. If you used the high temperature options and the heat dry option, those lights will come on, too. If all of the lights on the control panel flash in sequence, this means the machine has detected an overfill. [. . . ]