User manual AIRLUX ATI322BK

[. . . ] The appliance can not be used above a dishwasher or a tumble-dryer: steam may damage the electronic appliances. Keep an eye on the cooking using grease or oils: that may quickly ignite. Make sure no cable of any fixed or moving appliance contacts with the glass or the hot saucepan. Magnetically objects (credit cards, floppy disks, calculators) should not be placed near to the engaged appliance. [. . . ] Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger presses the key, the corresponding command is activated. This activation is validated by a control light, a letter or a number in the display and/or a "beep" sound. You must first switching on the hob, then the heating zone: Press selection key from the zone If no action is made within 20 second the electronics returns in waiting position. The induction doesn't work: If there is no pan on the heating zone or if this pan is not adapted to the induction. In this case it is impossible to increase the power and the display shows [ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. After use, switch the heat element off: don't let the pan detection [ U ] active After the switch off of a heating zone or the complete stop of the hob, the heating zones are still hot and indicates [ H ] on the display. The symbol [ H ] disappears when the heating zones may be touched without danger. As far as the residual heat indicators are on light, don't touch the heating zones and don't put any heat sensitive object on them. The booster function [ P ] grants a boost of power to the selected heating zone. If this function is activated the heating zones works during 5 minutes with an ultra high power. The booster is foreseen for example to heat up rapidely big quantities of water, like nuddles cooking. Action Zone selection Increase power Start up the booster Stop the booster Control panel Press selection key from the zone Press key [ + ] Press key [ + ] Press key [ - ] The timer is able to be used simultaneous with all 2 heating zones and this with different time settings (from 0 to 99 minutes) for each heating zone. Setting and modification of the cooking time : Press selection key from the zone After a few seconds the control light stops with blinking. The time is confirmed and the cooking starts until the time reaches [ 00 ].  To stop the cooking time : Press selection key from the zone If several timers are activated repeat the process. Display [ 0 ] The remaining time [ 00 ] then stops Automatic stop at the end of the cooking time : As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings. As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound To stop the sound and the blinking it is enough to press any key. To avoid modifying a setting of cooking zones , in particular with within the framework of cleaning the control panel can be locked (with exception to the On/Off key [ ]). Action Start In the 5 seconds after start : Unlocking the hob Press simultaneously [ - ] and selection key from the front zone Repress key [ - ] No light on the displays Not adapted materials : aluminium and stainless-steel without ferromagnetic bottom, cupper, brass, glass, ceramic, porcelain. to check if pans are compatibles : Put a little water in a pan placed on an induction heating zone set at level [ 9 ]. [. . . ] Protection against the parts under tension must be ensured after the building-in. The data of connection necessary are on the stickers place on the hob casing near the connection box. The connection to the main must be made using an earthed plug or via an omnipolar Circuit breaking device with a contact opening of at least 3 mm. The electrical circuit must be separated from the network by adapted devices, for example: circuit breakers , fuses or contactors. [. . . ]