User manual AEG WS 1200-125

[. . . ] Read all safety warnings and all instructions, including those given in the accompanying brochure. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Appliances used at many different locations including open air must be connected via a current surge preventing switch. [. . . ] Appliances used at many different locations including open air must be connected via a current surge preventing switch. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Contact with a , , live" wire will also make exposed metal parts of the power tool , , live" and shock the operator. Appliances used at many different locations including open air should be connected via a residual current device of 30 mA or less. It is recommended to wear gloves, sturdy non slipping shoes and apron. Sawdust and splinters must not be removed while the machine is running. Always disconnect the plug from the socket before carrying out any work on the machine. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. ELECTRONICS The speed of rotation is adjusted electronically when the load increases. In case of a longer overload period the speed is decreased electronically. MAINTENANCE The ventilation slots of the machine must be kept clear at all times. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/ service addresses). As well as the machine type printed on the label and order the drawing at your local service agents or directly at: Milwaukee Electric Tool, Max-Eyth-Straße 10, D-71364 Winnenden, Germany. SYMBOLS Please read the instructions carefully before starting the machine. [. . . ] As well as the machine type printed on the label and order the drawing at your local service agents or directly at: Milwaukee Electric Tool, Max-Eyth-Straße 10, D-71364 Winnenden, Germany. SYMBOLS Please read the instructions carefully before starting the machine. Always disconnect the plug from the socket before carrying out any work on the machine. [. . . ]