User manual AEG SB2-700

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG SB2-700. We hope that this AEG SB2-700 user guide will be useful to you.


AEG SB2-700 : Download the complete user guide (1569 Ko)

You may also download the following manuals related to this product:

   AEG SB2-700 MANUAL 2 (3308 ko)
   AEG SB2-700 MANUAL 2 (3308 ko)
   AEG SB2-700 MANUAL 2 (3308 ko)
   AEG SB2-700 MANUAL 2 (3308 ko)
   AEG SB2-700 MANUAL 2 (3308 ko)
   AEG SB2-700 MANUAL 2 (3308 ko)
   AEG SB2-700 MANUAL 2 (3308 ko)
   AEG SB2-700 MANUAL 2 (3308 ko)
   AEG SB2-700 MANUAL 2 (3308 ko)
   AEG SB2-700 MANUAL 2 (3308 ko)
   AEG SB2-700 MANUAL 2 (3308 ko)
   AEG SB2-700 MANUAL 2 (3308 ko)
   AEG SB2-700 MANUAL 2 (3308 ko)

Manual abstract: user guide AEG SB2-700

Detailed instructions for use are in the User's Guide.

[. . . ] 13/8 mm Drilling capacity in soft- wood, with Forstner bit in 1st gear . [. . . ] Always use the auxiliary handle, even if the machine has a safety clutch since this safety clutch only engages when the machine blocks with a jerk. When working with large drill diameters, the auxiliary handle must be fastened in a right angle with the main handle (see illustrations, section , , Twisting the handle"). When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. SPECIFIED CONDITIONS OF USE The electronic drill/screwdriver can be universally used for drilling, percussion drilling, screwdriving and cutting screw threads. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. Volker Siegle Manager Product Development MAINTENANCE The ventilation slots of the machine must be kept clear at all times. If the machine is mainly used for percussion drilling, regularly remove collected dust from the chuck. [. . . ] NÄTANSLUTNING Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG SB2-700




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG SB2-700 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.