User manual AEG POWER BASE 30

[. . . ] 640 g SAFETY INSTRUCTIONS Please pay attention to the safety instructions in the attached leaflet!Do not dispose of used battery packs in the household refuse or by burning them. [. . . ] Never break open battery packs and chargers and store only in dry rooms. Please pay attention to the following symbol on the label of the charger: This tool is only suitable for indoor use. Before use check machine, cable, and plug for any damages or material fatigue. SPECIFIED CONDITIONS OF USE The quick charger can charge AEG NiCd batteries from 7. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. BATTERIES New battery packs reach full loading capacity after 4 - 5 chargings and dischargings. Battery packs which have not been used for some time should be recharged before use. CHARACTERISTICS After inserting the battery into the reception of the charger the battery will automatically be charged (green control lamp is illuminated continuously) When a hot or cold battery pack is inserted into the charger (flashing red lamp), charging will begin automatically once the battery reaches the correct charging temperature (0°C. Charging current is flowing when the temperature of the battery is between 10°C and 45°C. the battery's charging time is between 1 min and 25 min (at 1 , 4 Ah battery) , depending on the state of discharge. [. . . ] As well as the machine type printed on the label and order the drawing at your local service agents or directly at: AEG Elektrowerkzeuge, Max-Eyth-Straße 10, D-71364 Winnenden, Germany. NÄTANSLUTNING Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]