User manual AEG PNEUMATIC 3000 R2

[. . . ] SAFETY INSTRUCTIONS Please pay attention to the safety instructions in the attached leaflet! [. . . ] Always use the auxiliary handle, even if the machine has a safety clutch since this safety clutch only engages when the machine blocks with a jerk. When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. SPECIFIED CONDITIONS OF USE The rotary pneumatic hammer can be used for hammer drilling, chiselling in stone and drilling in wood, metal as well as plastic. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. EN 50144, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, in accordance with the regulations 98/37/EC, 89/336/EEC MAINS CONNECTION Connect only to single-phase a. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. MAINTENANCE The ventilation slots of the machine must be kept clear at all times. If the carbon brushes are worn, in addition to exchanging the brushes the tool should be sent to aftersales service. [. . . ] NÄTANSLUTNING Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]