User manual AEG PL 750

[. . . ] the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. [. . . ] It is recommended to wear gloves, sturdy non slipping shoes and apron. Sawdust and splinters must not be removed while the machine is running. Do not drill the housing, as the protective insulation would be rendered ineffective. Always disconnect the plug from the socket before carrying out any work on the machine. When working oak or beech wood, stones, paint, which could contain lead or other harmful chemicals). Use a dust absorption system and wear a suitable dust protection mask. ADVICE FOR OPERATION Never reach into the danger area of the planer when it is running. Place the front page of the machine on to the worpiece and switch on, before the planer blade touches the workpiece and then guide evenly over the workpiece. The v-shape notch in the front of the supporting plate ensures safe chamfering of edges. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. Connect only to single-phase AC current and only to the system voltage indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. [. . . ] It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]