User manual AEG MBS 30 TURBO

[. . . ] Refit the riving knife by all means after plunge cutting before starting to work again. Probeschnitt durchführen Carry out a test cut Effectuer une coupe d`essai Effettuare un taglio di prova Efectuar corte de prueba Efectuar experiências de corte Proefsnede maken Foretages et prøvesnit Foreta prøvekutt Gör ett provsnitt! [. . . ] Probeschnitt durchführen Carry out a test cut Effectuer une coupe d`essai Effettuare un taglio di prova Efectuar corte de prueba Efectuar experiências de corte Proefsnede maken Foretages et prøvesnit Foreta prøvekutt Gör ett provsnitt!Please pay attention to the safety instructions in the attached leaflet!Appliances used at many different locations including open air must be connected via a current surge preventing switch. It is recommended to wear gloves, sturdy non slipping shoes and apron. Always disconnect the plug from the socket before carrying out any work on the machine. Sawdust and splinters must not be removed while the machine is running. We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. Under unfavourable power supply conditions, other equipment may be affected. If the system impedance of the power supply is lower than 0, 2 Ohm, disturbances are unlikely to occur. Should components need to be replaced which have not been described, please contact one of our AEG service agents (see our list of guarantee/service addresses). As well as the machine type printed on the label and order the drawing at your local service agents or directly at: AEG Elektrowerkzeuge, Always disconnect the plug from the socket before carrying out any work on the machine. [. . . ] If the system impedance of the power supply is lower than 0, 2 Ohm, disturbances are unlikely to occur. Should components need to be replaced which have not been described, please contact one of our AEG service agents (see our list of guarantee/service addresses). [. . . ]