User manual AEG I84KV443FB

[. . . ] Sørg for at have følgende data klar, når du kontakter vores autoriserede servicecenter: Model, PNC, serienummer. How to install your AEG Induction Hob - Worktop installation Tryk på i 1 sekund for at tænde eller slukke for kogesektionen. Hvis kogesektionen når grænsen for den maksimalt tilgængelige effekt inden for én fase, reduceres effekten af kogezonerne automatisk. Sluk og tænd igen for kogesektionen for at aktivere funktionens automatiske betjening. [. . . ] To set the cooking zone: touch repeatedly until the indicator of a cooking zone appears. To activate the function: touch of the timer to set the time (00 - 99 minutes). When the indicator of the cooking zone starts to flash, the time counts down. To deactivate the function: touch to set the cooking zone and then touch . CountUp Timer You can use this function to monitor how long the cooking zone operates. To set the cooking zone: touch repeatedly until the indicator of a cooking zone appears. When the indicator of the cooking zone starts to flash, the time counts up. To see how long the cooking zone operates: touch to set the cooking zone. Minute Minder You can use this function when the hob is activated and the cooking zones do not operate. To activate the function: touch and then touch or of the timer to set the time. This function sets all cooking zones that operate to the lowest heat setting. When the function operates, all other symbols on the control panels are locked. To override the function for only one cooking time: activate the hob with . - the sounds are on To confirm your selection wait until the hob deactivates automatically. When the function is set to you can hear the sounds only when: Count Down Timer comes down · You put something on the control panel. If multiple zones are active and the consumed power exceeds the limitation of the power supply, this function divides the available power between all cooking zones (connected to the same phase). The hob controls heat settings to protect the fuses of the house installation. Cooking zones are grouped according to the location and number of the phases in the hob. If the hob reaches the limit of maximum available power within one phase, the power of the cooking zones will be automatically reduced. The heat setting of the cooking zone selected last is always prioritised. The remaining power will be divided between the previously activated cooking zones in reverse order of selection. The heat setting display of the reduced zones changes between the initially selected heat setting and the reduced heat setting. [. . . ] Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The information about guarantee period and Authorised Service Centres are in the guarantee booklet. Left front Left rear Middle front Right rear Nominal power (maximum heat setting) [W] The power of the cooking zones can be different in some small range from the data in the table. [. . . ]