User manual AEG GS 500 E

[. . . ] Maximum no-load speed in case of ineffective no-load speed limitation . Read all safety warnings and all instructions, including those given in the accompanying brochure. [. . . ] Due care should be taken that no sparks or sanding dust flying from the workpiece come into contact with you. The adjusting nut must be tightened before starting to work with the machine. Under the effect of extreme electromagnetic interferences from the outside, temporary variations in the speed of rotation could arise in particular cases. Always use and store the grinding disks according to the manufacturer`s instructions. Make sure that the grinding tool is installed in accordance with the manufacturer`s instructions. For dusty operations, the machine`s ventilation slits must be kept clear. If necessary, switch off the power to the machine and remove the dust. Use a non-metallic object for this, taking care not to damage any of the inner parts. SPECIFIED CONDITIONS OF USE Straight grinders are suited for grinding metal, plastic, or similar materials, especially in hard accessible corners and places. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. MAINTENANCE The ventilation slots of the machine must be kept clear at all times. [. . . ] In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. NÄTANSLUTNING Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]