User manual AEG FSK93707P

[. . . ] We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. visit our website to: Get usage advice, brochures, trouble shooter, service and repair information: www. Buy Accessories, Consumables and Original spare parts for your appliance: www. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. [. . . ] Carefully shake the funnel by its handle to get the last granules inside. Fill the dispenser (B) until the rinse Remove the spilled rinse aid with an Make sure that the lid locks into position. Close the water tap when the Only use detergent specifically designed for dishwashers. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. For information about the detergent dosage, refer to the manufacturer's instructions on the packaging of the product. Usually, 20 - 25 ml of gel detergent is adequate for washing a load with normal soil. The upper ends of the two vertical ribs inside the compartment (B) indicate the maximum level for filling the dispenser with gel (max. Slide your finger across MY TIME selection bar to choose a suitable programme. The ECOMETER indicates the updated level of energy and water consumption. By default, options must be activated every time before you start a programme. If the latest programme selection is enabled, the saved options are activated automatically along with the programme. It is not possible to activate or deactivate options while a programme is running. Activating options often increases the water and energy consumption as well as the programme duration. The light related to the button is The display shows the longest MY TIME and EXTRAS are not applicable to this program. The appliance senses the type of load and adjusts a suitable wash cycle. During the cycle, the sensors operate several times and the initial program duration can decrease. Press repeatedly until the display shows the desired delay time (from 1 to 24 hours). During the countdown, you cannot change the delay time and the programme selection. 6 Opening the door while the appliance operates Opening the door while a programme is running pauses the wash cycle. The programme bar at the bottom of the display indicates the current progress of the wash cycle. After closing the door, the wash cycle resumes from the point of interruption. If you open the door during the delay start countdown, the countdown is paused. [. . . ] For alarm codes not described in the table, contact an Authorised Service Centre. Before contacting an Authorised Service Centre, write down the PNC number. We do not recommend using the appliance until the problem has been completely fixed. Unplug the appliance and do not plug it in again until you are certain that it operates correctly. [. . . ]