User manual AEG FSE62400P

[. . . ] We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. visit our website for: Get usage advice, brochures, trouble shooter, service information: www. Buy Accessories, Consumables and Original spare parts for your appliance: www. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. [. . . ] How to deactivate the rinse aid empty notification Make sure the appliance is in user mode. The display shows the current Setting: = the rinse aid empty = the rinse aid empty notification is deactivated. There is also an acoustic signal that sounds when the programme is completed. How to activate the acoustic signal for the end of programme Make sure the appliance is in user mode. The display shows the current AirDry improves the drying results with less energy consumption. During the drying phase, the door opens automatically and remains ajar. Do not try to close the appliance door within 2 minutes after automatic opening. airDry is automatically activated with all programmes excluding (if applicable). To improve the drying performance refer to the XtraDry option or activate AirDry. If children have access to the appliance, it is advised to deactivate AirDry as opening the door may pose a danger. Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. If you select non compatible options, the appliance automatically deactivates one or more of them. If an option is not applicable to a programme, the related indicator is off or it flashes quickly for a few seconds and then goes out. Activating options can affect the water and energy consumption as well as the programme duration. This option provides better hygiene results by keeping the temperature at 70 °C for at least 10 minutes during the last rinsing phase. With XtraDry on, the Make sure that the current level of the water softener agrees with the hardness of the water supply. Duration of some programmes, water consumption and the last rinse temperature can be affected. In the other programmes the setting of XtraDry is permanent and it is automatically used in next cycles. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. This function decreases energy consumption by deactivating automatically the appliance when it is not operating. The function comes into operation: · 5 minutes after the completion of the After 5 minutes if the programme has Make sure that the appliance is in programme selection mode. [. . . ] The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the appliances in use. Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. Once you have checked the appliance, deactivate and activate the appliance. [. . . ]