User manual AEG FS 140

[. . . ] The oscillating sander can be used for sanding wood, plastics and metal. We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents: EN 60745, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, in accordance with the regulations 2006/42/EC, 2004/108/EC Sound pressure level (K = 3 dB(A)) . [. . . ] This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. Read all safety warnings and all instructions, including those given in the accompanying brochure. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Connect only to single-phase AC current and only to the system voltage indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. Should components need to be replaced which have not been described, please contact one of our service agents (see our list of guarantee/ service addresses). As well as the machine type printed on the label and order the drawing at your local service agents or directly at: AEG Elektrowerkzeuge, Max-Eyth-Straße 10, D-71364 Winnenden, Germany. Always disconnect the plug from the socket before carrying out any work on the machine Accessory - Not included in standard equipment, available as an accessory. Do not dispose of electric tools together with household waste material!In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Appliances used at many different locations including open air should be connected via a residual current device of 30 mA or less. [. . . ] Use a dust absorption system and wear a suitable dust protection mask. Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]