User manual AEG EX 125 ES

[. . . ] Press carefully the fuzzy side of sanding disc against the packaging pad, as firmly as possible. Typically, the A-weighted noise levels of the tool are: Sound pressure level (K = 3 dB(A)) . [. . . ] However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. Read all safety warnings and all instructions, including those given in the accompanying brochure. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents: EN 60745, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, in accordance with the regulations 2006/42/EC, 2004/108/EC Connect only to single-phase AC current and only to the system voltage indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. Appliances used at many different locations including open air should be connected via a residual current device (FI, RCD, PRCD) of 30mA or les. It is recommended to wear gloves, sturdy non slipping shoes and apron. Always disconnect the plug from the socket before carrying out any work on the machine. [. . . ] Fel som uppstår till följd av att anvisningarna nedan inte följts kan orsaka Se till att motorhöljets luftslitsar är rena. Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]