User manual AEG DB 1500-2 XE

[. . . ] 12 m/s2 Typical A-weighted sound levels: Sound pressure level (K = 3 dB(A)) . Read all safety warnings and all instructions, including those given in the accompanying brochure. [. . . ] The dust that arises when working with this tool can be detrimental to health and therefore not reach the body. Always disconnect the plug from the socket before carrying out any work on the machine. When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. SPECIFIED CONDITIONS OF USE The diamond drill can be used to drill with diamond dry drill bits. With drill chuck mounted the machine is suitable for percussive drilling in rock and drilling holes in wood and steel. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. MAINTENANCE The ventilation slots of the machine must be kept clear at all times. Should components need to be replaced which have not been described, please contact one of our AEG service agents (see our list of guarantee/service addresses). As well as the machine type printed on the label and order the drawing at your local service agents or directly at: AEG Elektrowerkzeuge, Max-Eyth-Straße 10, D-71364 Winnenden, Germany. SYMBOLS Please read the instructions carefully before starting the machine. Always disconnect the plug from the socket before carrying out any work on the machine. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. pROTECTION OF MOTOR IN CASE OF OVERLOAD Motor protection device controlled by motor load. The machine will slowly continue to run in order to cool the motor down. [. . . ] For best performance the diamond segments should be "roughed-up" to expose the fragments of diamond: To expose the diamond fragments rub surface of segments with stone Do not dispose of electric tools together with household waste material!In observance of European Directive 2002/96/ EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. [. . . ]