User manual AEG BSS 12 C

[. . . ] Date 2009-02-06 Page 12-64 Changes Technical Data: Weight with battery (3, 0 Ah) -> Weight with battery (1, 5 Ah) Please read and save these instructions!Typically, the A-weighted noise levels of the tool are: Sound pressure level (K = 3 dB(A)) . Total vibration values (vector sum in the three axes) determined according to EN 60745. [. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a , , live" wire may make exposed metal parts of the power tool , , live" and could give the operator an electric shock. Sawdust and splinters must not be removed while the machine is running. When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. Do not dispose of used battery packs in the household refuse or by burning them. AEG Distributors offer to retrieve old batteries to protect our environment. Do not store the battery pack together with metal objects (short circuit risk). use only System PCLS chargers for charging System PCLS battery packs. Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it off immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention. SPECIFIED CONDITIONS OF USE The cordless impact driver can be used to tighten and loosen nuts and bolts wherever no mains connection is available. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. [. . . ] BATTERY PACK PROTECTION The battery pack has overload protection that protects it from being overloaded and helps to ensure long life. under extreme stress the battery electronics switch off the machine automatically. If the machine does not start up again, the battery pack may have discharged completely. [. . . ]