User manual AEG BSB 12G

[. . . ] Typically, the A-weighted noise levels of the tool are: Sound pressure level (K = 3 dB(A)) . Total vibration values (vector sum in the three axes) determined according to EN 60745. [. . . ] AEG Distributors offer to retrieve old batteries to protect our environment. Do not store the battery pack together with metal objects (short circuit risk). use only System GBS chargers for charging System GBS battery SAFETY INSTRUCTIONS packs. No metal parts must be allowed to enter the battery section of the Hold power tool by insulated gripping surfaces, when performing charger (short circuit risk). Never break open battery packs and chargers and store only in dry Fasteners contacting a "live" wire may make exposed metal parts of rooms. The power tool "live" and could give the operator an electric shock. Battery acid may leak from damaged batteries under extreme load Always wear goggles when using the machine. In case of contact with battery acid wash wear gloves, sturdy non slipping shoes and apron. In case of eye contact rinse Sawdust and splinters must not be removed while the machine is thoroughly for at least 10 minutes and immediately seek medical running. When working in walls ceiling, or floor, take care to avoid electric The dust produced when using this tool may be harmful to health. Read all safety warnings and all instructions, including those given in the accompanying brochure. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. BS 12G, BS 14G: The Cordless drill is designed for drilling and screwdriving for independent use away from mains supply. BSB 12G, BSB 14G: The Cordless impact drill is designed for drilling, percussion drilling, as well as screwdriving for independent use away from mains supply. [. . . ] Do not dispose of electric tools together with household waste material!In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. [. . . ]