User manual AEG BS 12 C2

[. . . ] 2 Noise/Vibration Information Measured values determined according to EN 60 745 Typically the A-weighted sound pressure level of the tool is: Sound pressure level . Total vibration values (vector sum in the three axes) determined according to EN 60745. 5 * Measured according to AEG norm N 877318 WARNING The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. [. . . ] Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a live" wire may make exposed metal parts of the power tool live" and shock the operator. Sawdust and splinters must not be removed while the machine is running. When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. Do not dispose of used battery packs in the household refuse or by burning them. AEG Distributors offer to retrieve old batteries to protect our environment. Do not store the battery pack together with metal objects (short circuit risk). use only System PCLS chargers for charging System PCLS battery packs. Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it off immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention. SPECIFIED CONDITIONS OF USE The battery drill/screwdriver is designed for drilling and screwdriving for independent use away from mains supply. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. BATTERIES New battery packs reach full loading capacity after 4 - 5 chargings and dischargings. [. . . ] SYMBOLS Please read the instructions carefully before starting the machine. Do not dispose of electric tools together with household waste material!In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. [. . . ]